CAMBRIDGE QT Guida di Installazione Scaricare il pdf (Pagina 5)

Cambridge Sound Management / 27 Moulton Street / Cambridge, Massachusetts 02138

617/349-3779 or 800/219-8199 / www.cambridgesoundmanagement.com

NOTES ON LARGER AREA INSTALLATIONS:

• DO NOT CONNECT MORE THAN 60 EMITTERS OR EXCEED A LINE LENGTH OF 1,000

FEET ON A SINGLE HOME RUN TO THE CONTROL UNIT.

• Cable splitters, 2-way or 4-way, may be necessary to meet this requirement on larger systems.

For details, refer to the Splitter Model Diagram below.

QUICK INSTALLATION OVERVIEW:

• Assuming a sequence of emitters is being installed - with A as the first tile

and B as the second - remove both ceiling tiles.

• Throw a 16 ft. cable from B to A. A now has two cables – one from the

control module (or previous tile) and one from B.

• Using the supplied hole saw and a pre-drilled tile as a template, drill a

hole in the center of tile A.

• Install the emitter in tile A by pushing the emitter through the

drilled hole and slipping on and twisting the locking nut.

• Back on the ladder, plug the cable from the previous location into

tile A emitter input jack

and the cable going to tile B into the

emitter output jack

• Replace tile A to complete the installation.

1 2 3 4 5 6 7 8

Nessun commento

CAMBRIDGE QT Guida di Installazione Pagina 5